Fig Correct plugs After you click on the OK button, EPLAN generates the definitions as unplaced functions visible in the corresponding navigators, and from here they can also be placed on pages if necessary.
 
 

– EPLAN Electric P8 Reference Handbook – Free Download PDF

 
EPLAN Electric P8 Reference Handbook. July 17, | Author: filum | Category: Electrical Connector, Portable Document Format, Backup, Icon (Computing). EPLAN Electric P8, EPLAN Fluid, EPLAN PPE and LOGOCAD TRIGA are registered trademarks of EPLAN Software & Service GmbH & Co. KG. ®. The book is meant to make it easier to start using the software and to smoothly guide you around initial hiccups when working with EPLAN Electric P8. Numerous.

 

– Eplan electric p8 pdf guide free

 
New devices are selected in the device source and device target fields using the button. In order to find a particular program function, elecric menus and options shown in a menu path must продолжение здесь selected in the sequence shown. This makes it possible, like with terminals, to use the same designation several times PE railand the eplan electric p8 pdf guide free run will not find any duplicate connection point designations. Move the mouse pointer onto the element with the designation -Q1.

 
 

Eplan electric p8 pdf guide free –

 
 

In the Page description field, enter the text Cover Sheet. In the Form name field, you may pick a form to automatically fill in the cover sheet. Select the arrow pointing down to pick the item Browse. And click [OK]. Now you may select a plot frame that matches your form. In the Plot frame name field, select the Browse item. Then, in the plot frame selection dialog select the right plot frame.

If you do not select any plot frame name, the default plot frame name will be used. This can be defined in the project settings. This is a D Size plot frame matching the form selected previously and this plot frame has no logical ladder, row or columns associated to it. In the tree view of the Page navigator, select the second sheet page 2. In the Page description field, enter the text Main Circuit.

There is no separate save necessary, and so there is no corresponding menu item in the program! Creating a Page For the schematic editing in a later chapter, you will need another page of the Schematic multi-line type. In the tree view of the Page navigator, select the schematic page 2.

Most property fields already have values. EPLAN accepts the properties of the selected page and automatically suggests the next free page for the full page name. In the Page description field for page 3, enter the text Control Circuit. You will also learn how to open and close a project, and you will learn a few basic commands for viewing and editing a project. Opening the Project 1.

Here, the projects are shown which are located in your predefined project directory by default where at the installation setup you have inputted your company name. Then repeat this for the plus sign in front of the structure level CA1, then for the next to the structure level EAA. The pages are now displayed in the “lowest” project level.

First, page through the pages of this extensive project. Paging Through the Project Pages Using the appropriate program functions, you can look at the pages of a project one after the other in the graphical editor. Repeat this action a few times and look at the contents of the pages in the graphical editor.

If the tree structure in the Page navigator was not yet completely opened, this will be done while paging through the pages. The page name and the description of the currently opened page are highlighted in bold in the Page navigator. Page back a few pages, too. However, if your cursor is located in the Page navigator, the keys will not page through the pages but will cause the cursor to jump to the bottom or top page shown in the tree view.

Both for the demo project and for your practice project, the Options menu has the menu items Snap to grid and Object snap enabled by default.

These two options make it possible to orient elements directly to the grid points or element points when drawing. Please leave these options activated while creating the following schematic. The size of the grid used is stored as a page property and shown in the status bar.

The use of grid snap is independent of the grid display options. If this view bothers you later when creating the schematic, then turn the grid display off in the same way.

Using window zoom Normally, the entire page is shown in a window of the graphical editor. For schematic editing, it is often a good idea to enlarge a certain screen segment in order to be able to see details better. For instance, you can use the “window zoom” in order to show a certain window segment in an enlarged view.

Left-click the mouse in the upper left corner of the schematic, and use the mouse to open an area which includes about a quarter of the schematic page. Click the left mouse button again. By default, during scrolling the mouse wheel acts in the same way you are familiar with from other CAD programs. In the settings, you also have the option of changing the scrolling behavior so that it matches the behavior of text editing programs.

In this case, when you scroll with the mouse wheel, the visible section of the page is moved upwards or downwards. Move the mouse pointer onto the element with the designation -Q1. Below the symbol, a small text window Tooltip is displayed with information about the element.

Select the element by clicking on it. The element -Q1 is completely deleted. You can, however, use the Undo command to reinsert the element. Note: When editing elements in the graphical editor, besides the usual Windows operating methods first select elements, then call command , in most cases the reverse order of operation first call the command, then select elements is also supported.

The box with the red X is the symbol assigned to the delete function, and the box with the dashed line stands for the area to be selected. Left-click the mouse button on the upper left of the element, and use the mouse to drag a frame around -Q1.

Closing the Project 1. If your cursor is in the Page navigator, then the project for which you have selected one or more pages is closed. Note: Please note that the menu item Close in the popup menu of the page navigator only closes the page currently located in the foreground.

Tip: In the Project menu, beneath the menu item Print, a list of the last projects opened is displayed. You can use this list to open a corresponding project without needing to use the menu item Open. EPLAN opens the demo project again. After it opens, practice closing it again. Now that you have looked at the complicated demo project in this chapter, in the next two main sections you will create a much “simpler” schematic. What you Need to Know in Advance What is a symbol?

It does not contain any logical data. These are stored in the function. What is a component? A component is a graphical element for the representation of a function. It consists of a function and a symbol. The function contains the logical data and the symbol contains the graphical data. A component has a device tag, connection point designations, and so on. What is a Device Tag? A device tag is a unique name for each device inserted in your project.

The device tag usually follows a certain numbering scheme. This scheme can be set in your project setting. Selecting a symbol In Symbol selection, you can select symbols from a tree or list view.

In the tree view, symbols are divided neatly into different groups based on their function definitions. Here, you can page through the different groups until you find the symbol you want.

Example: The following illustration shows symbol selection through the tree view for the first device to be inserted. On the right side in the dialog, the symbol selection presents you with a preview. Once you have selected the desired symbol in the preview, you can accept it with a double-click. For the practice project, we are using a symbol selection from the list view. You can also select a symbol very quickly using direct entry in the list view.

Note: The symbol selection via direct entry described below works only if you leave the columns of the list configured so that the name of the symbol is in the first column. In the Symbol selection dialog, select the List tab. Enter Q1 into the Direct entry field. The selected symbol is displayed in the preview window on the right side, with all existing variants.

The first variant of each is selected in the preview window. In the list, select the three-pole switch Q1 and click [OK]. Determining properties After placing the switch on the page, the Properties components dialog opens.

Some fields are already pre-filled with entries. This behavior is called online numbering. In the settings, you can deactivate online numbering and also change the predefined numbering format. You can always change it… The Identifier can be setup by default to follow your identifier. Here we are using to most commonly used internationally, the IEC Identifier.

In the Connection point designation, you can enter different formats depending on the way you number your connection designations. You can also select the menu item Line break from the popup menu. Enter the value 16A into the Technical characteristics field.

You have now inserted a switch with three NO contacts into the schematic. Q is shown as the displayed DT. In the schematic, you also see the connection point designations entered and the function text.

Inserting “Angle” Connection Symbols As the second elements, insert a few angles at the bottom left of your schematic. Angles and other elements T-nodes, interruption points, etc. Technically they will generate automatically create the wire in a fashion we call “auto-connect”. You can immediately insert the Angles up, right at the positions Row , RX Or you may hit the [Esc] Escape key top left of your keyboard. For each direction, there are then four variants. Position the T-node at the coordinates RX Double-click on the insertion point of the T-node.

Here, select the option 1st target below, 2nd target right. Inserting other general devices Proceed in the same fashion as above for the components listed below.

In the list view, select symbol selection using direct entry. To do this, enter the symbol name given below for each one. Symbols of the same type can be inserted immediately one after the other.

Before you can then select a different symbol, you must finish the action and then call symbol selection again. Position the symbols on the given coordinates and fill in the properties of the components inserted, if necessary. The entries of the prefilled properties are given in parentheses in the following listing.

Path in tree view Symbol description 1. Path in tree view Symbol description 3. Path in tree view Symbol description 7. Path in tree view Symbol description Entries Enter X into the Direct entry field. In the list, select the number 30 Terminal and click [OK]. Position the first terminal at the coordinates RX Here is where you determine the properties of the terminals.

Terminals are also automatically numbered by default. Position two more terminals at the coordinates RX For the terminals, you can accept the predefined terminal designations 2 and 3. Finish the action by selecting the menu item Cancel action from the popup menu. The terminal strip definition identifies the terminal strip and contains all the relevant data for the strip as well as the terminal strip part information. Position the symbol at the coordinates RX Due to the automatic numbering, the field Displayed DT is already prefilled with the entry X2.

In the Displayed DT field on the Terminal strip definition tab, enter the strip designation X1 already assigned in the circuit diagram. In the Function text field, enter the text Terminal strip motor. Drawing Cable Definition Lines Cables can be displayed graphically with cable definition lines or shields.

The cable definition line must cross the corresponding connections. Position the cursor at the coordinates RX Click with the left mouse button to establish the starting point of the line. Then move the cursor to the coordinates RX In the fields No. In the Remark field, enter the text Motor cable. When drawing the cable definition line, a connection definition point is automatically set at each intersection of connections with the cable definition line.

The cable conductors are determined via the connection definition points. You will only see these automatically generated connection definition points if you have activated the view of insertion points. For certain actions e. In doing this, new connections are generated based on the available information or existing connections are updated.

The individual connection can get its data from project settings, potentials, or from a connection definition point. All of the old functions are still there with some new additions , but they are now located. In This Guide Microsoft Word looks very different, so we created this guide to help you minimize the learning curve. Read on to learn key parts of the new interface, discover free Word training,.

Introduction to Microsoft Access Introduction A database is a collection of information that’s related. Access allows you to manage your information in one database file.

Within Access there are four. Log in Registration. Search for. Size: px. Start display at page:. Deborah Day 6 years ago Views:.

Similar documents. Cardinal Numerals. Old English from a Cross-Linguistic Perspective. Lean Innovation. A Fast Path from Knowledge to Value. Project Management. Hardcover More information. Modern TRIZ. Bearbeitet von Michael A. Early Christianity in the Context of Antiquity More information.

Microsoft Word Create a Table of Contents Microsoft Word Create a Table of Contents Creating a Table of Contents for a document can be updated quickly any time you need to add or remove details for it will update page numbers for you.

A More information. Microsoft Access handout Microsoft Access handout Access is a relational database program you can use to create and manage large quantities of data. You can use Access to manage anything from a home inventory to a giant More information. Add and delete a cover page Read on to learn key More information.

A navigation bar More information. User Guide Bitrix Site Manager 4. Software version 4. Mastering Mail Merge. Mail Merge Mailings Ribbon. Creating tables of contents and figures in Word Creating tables of contents and figures in Word Information Services Creating tables of contents and figures in Word This note shows you how to create a table of contents or a table of figures More information.

Connection to the TestManager More information. Microsoft Outlook We cannot be held liable More information. Generative Drafting. E-mail, while it’s certainly much faster than the traditional post office More information. Paperback More information. Danger This alerts you to things that may cause More information. In this session, we will explain some of the basics of word processing.

Describe the Word Screen More information. Creating a table of contents quickly in Word Creating a table of contents quickly in Word This note shows you how to set up a table of contents that can be generated and updated quickly and easily, even for the longest and most complex documents.

Internet Explorer 7. Tabs NEW! Working with the Tab Row. To expand More information. Table of Contents Introduction More information. RackTools has been designed with one purpose More information.

Module One: Getting Started Opening Outlook Setting Up Outlook for the First Time Understanding the Interface We will More information. See this More information. Send SMS as fast as e-mail! I ntroduction. Accessing Microsoft PowerPoint. To open More information. Table Of Contents. Microsoft Word Quick Reference Guide. Automate tasks with Visual Basic macros Automate tasks with Visual Basic macros If you’re not familiar with macros, don’t let the term frighten you.

A macro is simply a recorded set of keystrokes and instructions that you can use to automate More information. Above the Ribbon in the upper-left corner is the Microsoft More information.

Installation Windows Double-click with More information. A mechanical drawing More information. Stepby-step instructions will be given to guide the reader through generating a project, creating More information. Polarisavenue 1 JH Hoofddorp More information.

Web Intelligence Rich Client 4. A new More information. Here you can find all of the drawing and editing tools needed to create fast, accurate, detailed working More information. Microsoft Office Excel Key Features. You will build a simple program that enables you to switch the color of More information. Sage Software, Sage Software logos, and the Sage Software product and service names mentioned herein are registered More information. Legal Notes.

Regarding Trademarks. We cannot be held liable for any problems arising from More information. Basic Microsoft Excel Basic Microsoft Excel The biggest difference between Excel and its predecessors is the new layout. All of the old functions are still there with some new additions , but they are now located More information. Microsoft Migrating to Word from Word In This Guide Microsoft Word looks very different, so we created this guide to help you minimize the learning curve.

Read on to learn key parts of the new interface, discover free Word training, More information. In the properties dialog, switch to the Coil tab. In the Displayed DT field, enter -K1. This includes the connection point designations, the symbols, and the schematic positions of the contacts cross-referenced to the coil and is shown below the coil. Inserting another contact for the coil Now use symbol selection to insert another contact for the coil.

For searching via direct entry enter S and then select the NO contact with symbol number 1. The DT selection dialog which then appears shows all the DTs present in the project which match the given function. Inserting Contacts and Contact Image for Motor Overload Switches Finally, insert two more contacts on this page for the motor overload switch —Q2 on the first schematic page.

In the Direct entry field, enter O. In the properties dialog, switch to the NC contact tab. In the Displayed DT field, enter -Q2. Or apply the displayed DT using DT selection. To do so, click [ Now use symbol selection to insert another NO contact symbol name for Direct entry: S; symbol number: 1.

You have now completed the creation of the schematic on the second page. On the motor overload switch itself, you see the contacts just inserted as a contact image. The cross-referenced contacts are shown as symbols on the action line of the motor overload switch.

In addition, the connection point designations and the schematic positions of the contacts can be seen in the contact image. Tip: From the NO contact you just inserted, —Q2, you can jump directly to the motor overload switch on the first schematic page. Changing the contact image position For contacts to be shown in a contact image, appropriate display settings must be made for the contact image in the properties dialog of the motor overload switch.

Look at these settings in the motor overload switch. Double-click in the schematic on motor overload switch —Q2.

In the properties dialog, switch to the Display tab. Using the On component option, the contact image is displayed next to the component. This setting is preset by default during insertion of motor overload switches. In this dialog, you can “manually” determine the position of the contact image in relation to the insertion point of the device.

Deactivate the Automatically aligned check box. In the X position field, enter the value Now you are finished with both of the schematic pages of your project. In the next chapter you will learn how to assign parts to the devices inserted. Before you start with reports and can automatically generate a parts list, you must enter parts for the devices inserted. The Parts tab is available in the property dialog of the components to do this. Here you can manually enter the parts or select them using “part selection”.

Part selection is a dialog you can use to select parts and their data from a data source. What is parts management? Parts management is the part of the program in which you can manage information specific to parts and people; items such as part numbers, customer, manufacturer, or supplier data.

To manage parts data, you have to have at least advanced user knowledge, and for this reason we will not go into any more depth about parts management here. Assigning Parts 1. Double-click on the insertion point of switch -Q1. In the properties dialog, switch to the Parts tab.

Click [ The button appears once you click on the corresponding table cell in the Part number column. Structurally, this dialog is exactly like Parts management. In the left half, the parts are shown in a tree, list or a combination of these two representations, where the tree structure is subdivided by default into the hierarchy levels: Electrical engineering, Fluid power, and Mechanics.

In the right half of the dialog, you see the data belonging to the element or elements selected in the left window. Now expand the parts tree on the left side. To do this, click, for example, on the associated plus sign in front of the levels Parts, Electrical engineering, Component, General, and on the levels of other product groups like Cables. Or select the various levels in the tree, and then select Expand in the popup menu.

The parts numbers are shown on the lowest level in the tree. To reduce the amount of data shown, select a filter now. The check box Identifier Q is already prepopulated. Click [OK] to confirm the setting. In Part selection, select the corresponding Active check box for the Automatic filter so that the filter settings will be used. In the tree from product group Power switchgear, select the part SIE. The image file stored in the part will also be displayed in the Graphical preview.

Whenever there is a difference between the data stored for the part and the data in the component, this dialog is called during Part selection. For the property Technical characteristics, click the Option field and select the entry Retain from the drop-down list. Close the properties dialog with [OK]. If you specified the entry, Parts data, here, then you will initially be shown no data. Only after you have clicked [OK] or [Apply] in the properties dialog will the data from parts management.

Part number, Type number, etc. These values cannot be modified here. If you selected Part reference data, then data such as Service time is shown here, which you can also store in Parts management for a particular part. In contrast to the “pure” parts data, however, you have the option of changing this data in the properties dialog and adapting it to the corresponding device in your own project.

Repeat this action for the devices listed below. When doing so, assign the various parts to the devices based on the listed parts numbers. To do this, you must always select the Retain option for each property. Reports represent queries of the project data. They are created automatically and can be output directly in pages or labeling files.

This includes e. What are report pages? Report pages are project pages that show the results of a report. The reports are divided into different report types. In order to clearly structure and format project data in the report pages, these report types are assigned forms in the settings.

The forms contain placeholders that are filled with project data during reporting. You can use this dialog to create and manage project reports. Change to the Reports tab. If you expand the tree e. Up until now, of course, no reports have been created for your sample project! Click the [New] button. In the Output format field, apply the default value Page.

In the Select report type field, select the Terminal diagram entry. For this entry to be displayed, you must either enlarge the dialog or scroll through the entries using the scrollbar. Using this dialog, you can determine filter, sorting, and page break settings for the pages to be output. For your project, however, this is not required. Click [OK] to confirm the predefined settings. In this dialog, you determine the start page for the respective report, in this case the terminal diagram. This will sort the report pages in the existing page structure of the project.

In the Higher-level function field, enter ANL. Since the identifier already exists in your project, however, you can select it using a selection dialog. In the Mounting location field, enter ASW. Now expand the tree on the left side. Click [Close]. In the Page navigator, you now see the new page. By deactivating the Automatic page description check box, you also have the option of entering your own description for each report page in the Page description field.

Open the page by double-clicking on it, and look at the terminal diagram in the Graphical editor. Otherwise, parts entered on the cable definition line will not be taken into account during output of the parts list.

Click the [Settings] button. Select the Parts menu item. In the Include parts table, deactivate the Devices without part number check box so that this device is ignored when outputting the parts list. The Terminal strip parts check box is activated by default due to the project template being used. If this is not the case for you, activate it. Also activate — if necessary — the Terminal parts and Cable part check boxes. Deactivate all other check boxes that are enabled by default.

Now continue with the output of the other report pages. Printing Other Report Pages Repeat the action described in the first section of this chapter for the reports Cable diagram, Parts list, and Table of contents. On each report, select the corresponding report type from the Select report dialog.

For instance, you do not need to enter new identifiers in the Cable diagram Total dialog, but rather can apply an existing structure from the Page navigator field. The identifiers of this page are applied to the Higher-level function and Mounting location fields, and for the Page name, the next free page is suggested. Instead of “2”, enter the page number 10 into the Page name field. This time, enter the page number 20 in the Page name field. Finally, organize the Table of contents behind the cover sheet by selecting the page with the Cover sheet description in the Page navigator field.

The is used to mark all report types that represent report overyellow icon views e. The orange icon characterizes function-relevant report types e. The level below that, marked in the tree with a yellow or orange icon with an opened drawer or is called a “report block” or just a “block”. All report pages belonging to a particular element e.

In your current sample project, there is only one report block for each report. If, on the other hand, there were two terminal strips -X1 and -X2 in the schematic, then, for instance, the terminal diagram pages for terminal strip -X1 would make up their own block, just as the terminal diagram pages for terminal strip -X2. They have as in the Page navigator.

Then open the newly generated pages and look at these pages in the Graphical editor. With the generation of report pages, the creation and editing of your sample project is finished for now. In the following chapters, we will cover some additional topics, such as creating and inserting macros and searching project data. Then you will update the reports in your project using report templates. If you like, you can now print your project pages out. For more information on this, see chapter “Printing a Project” on page You can, of course, print out the project pages at a later time, for example, at the end in the order of chapters.

In the following sections, for instance, you will create a window macro and then insert it. Creating and inserting macros of other types, such as pages and symbol macros, is done in a similar manner. Creating macros is helpful because you do not have recreate cut-outs every time a routine operation comes up. What is a window macro? A window macro is an arbitrary area of a page. All objects whose insertion points are inside this area are stored in the window macro.

Creating a Window Macro 1. Position the cursor in the upper right corner of the schematic e. In the Directory field, the preset default directory for macros is displayed. In the File name field, enter Drive as the name of the macro.

In the Description field, enter Conveyor belt as the description for the macro. The text entered here is displayed in a comments field when inserting macros and simplifies the selection for you. The macro is saved in the specified directory under the name Drive. Inserting a Window Macro Before you insert the macro that you just saved again, first create another schematic page of the type Schematic multi-line.

Insert the macro on this sample page opened in the Graphical editor. Select the Preview check box. The macro will also be displayed in the Graphical preview. Select the macro Drive. Position the macro at an arbitrary position in the schematic and click the left mouse button to place it. In this dialog you define the manner in which devices are to be numbered on insertion. Select the Number option. This causes the devices inserted by the macro to be numbered automatically online.

For a DT counter, this takes the next free counter for each identifier into account. Since the macro is still hanging on the mouse pointer, you could insert the macro again. As usual when inserting page macros, this creates a new project page. In the following chapter, we will show you how to search your sample project for a certain DT and a certain text and how you can then edit these objects.

If the settings for your dialog don’t match those of the figure shown below, you still need to perform steps 4 through 7. Otherwise, you can click [OK] immediately. In the Search in group box you can specify the objects in which you would like to search for the term.

In the Search location group box, you can exclude certain page types from the search. Here, activate the Logic pages and Graphical pages check boxes. You also have the option in this dialog of entering the results of a search into one of two possible results lists.

Select the List of results 1 option. The extent of the search depends on the selection made. If you have already highlighted a single project, the Apply to entire project check box will be activated and grayed out. You can then no longer change the relevant settings. If not, activate this check box, so that the search can be expanded to the entire project. All fuses in the project are listed in the dialog in tabular form.

If you cannot see all the entries, drag the dialog to enlarge it and adjust the width of the individual columns if necessary. Below the listed search results, EPLAN shows you a text field with the page on which each selected object is located.

Here you can now use the familiar graphical buttons to move or sort the properties. Forms reports are distin- guished by report type. Some properties are shared by all types of forms, but there are also properties that apply only to speciic report types. Form properties can only be edited in the form editor. An example of this is the Path areas property and its size. Plot frame properties can only be edited in the plot frame editor.

This is not unusual in such an extensive program. At this point, I would like to draw special attention to a number of dialog elements that occur repeatedly in many dialogs.

It is there- fore important to know what they mean and how they can be used. Graphical buttons play an important role because they provide easy access to most of the functions and procedures in EPLAN. This means that they always have the same structure, regardless of whether it is a device dialog for a motor overload switch or a transformer or any other component.

EPLAN uses diferent buttons in difer- ent tabs to simplify operation. Here is a list of the most commonly used buttons and what they mean. The number of buttons can vary here. Move the selected entries to the start of the list Move the selected entries to the end of the list Swap two selected entries swap positions In contrast to the graphical buttons in the device dialog, multiple entries can be selected here.

The functions provided by the other graphical buttons have already been described. Additional buttons in the Filter or Sorting dialogs: Edit entry Copy entry 2. Clicking the button itself displays the same popup menu.

It is very useful in dialogs that open iles or directories. Here you can quickly set the default directories, without having to click all the way through to the default directory.

The default setting is deined in the symbol struc- ture and cannot be changed here. To change these default settings, you have to edit the symbols. You can also change these property arrangements. Once they have been changed, they initially appear in the property arrangement with the designa- tion User-deined. This returns all manually changed settings on a symbol back to the default values deined for the symbol.

This user-deined arrangement can also be saved via the button and then called up or set at similar symbols. You can assign a descriptive name to the property arrangement. Ater you click oK, this property arrangement is saved, entered into the selection ield and is then avail- able to all symbol variants. The Use as default option allows EPLAN to immediately the next time you insert the same symbol and automatically use your own property arrangement. Though the dialogs may be somewhat diferent, the basic principle always remains very similar.

A normal text dialog is used as an example here. To format the text according to your personal wishes, you need to switch to the Format tab. You can freely format the text you just entered. You can edit all selection ields or select default values. These schemes are then always available for new versions, other projects or other workstations depending on the installation. This way, during an import, only those scheme types that can actually be imported into the current scheme are displayed.

System master data is stored in the directories with the associated user directory that were set during installation. In addition to the user-speciic system master data, the origi- nal EPLAN system master data is also installed in the EPLAN original master data directory depending on the directory selected during the installation. In case of a new installation or instal- lation of an update, the user-speciic system master data is not overwritten or updated.

In the following dialog, you can then update your own system master data accordingly. System master data contains data such as symbol libraries with the associated symbols, function deinitions, forms and plot frames.

Project master data is the other type of master data. Project master data, ater initial use, is moved from the system master data and stored in the project; ater it is stored it is independent of the system master data. However, to increase your own working speed, EPLAN is very lexible in allowing functions accessed with the mouse to also be accessed via deinable keyboard shortcuts.

Normally functions can be assigned to a keyboard shortcut if they are also accessible in the main menus, such as Page, Project etc. This function can be assigned a keyboard shortcut because it is a normal menu command. It is possible, but not recommended. Here are a number of recommended keyboard shortcuts that have proven useful in prac- tice. Admittedly, many menu items are easier to reach with the mouse than with cryptic key combinations that one usually can- not remember. This makes it possible to always call up your own user interface coniguration when you start up EPLAN on the same computer.

EPLAN allows you to create separate work- spaces for particular areas that contain exactly these desired toolbars, views or dialogs. A new workspace is created via the button. You should enter a name in the empty Name ield and a sensible description for the workspace in the Description ield. EPLAN has a number of difer- ent dialog representations in the navigators to ensure information is clearly displayed.

Similar to Windows Explorer, all information is displayed in a tree with small symbols. No changes to the form and content of the tree view are possible. EPLAN provides no options for this here. This is where you can deine how devices should be shown in the tree view, for example, by identiier or by the page preix.

This representation type ofers many more customization options to suit your working habits. As with the tree view, EPLAN shows all devices here as well again depending on the navigator that was selected. The cable navigator shows only cables, the terminal navigator shows only devices with the terminal function type, etc.

To add more information, you right click to call up the popup menu or press the button and then select conFigure coluMns. You can now select or deselect columns and change their order. Click the oK button to save the settings. You now have a personalized list view.

Here it is possible to preselect, for instance by selecting the Cable node. In the lower area, the preselected parts are shown in a clear list with additional speciic information. Edit in table is usually accessed from the tree view by right clicking to access the popup menu or via the button.

Unlike the previous representations tree or list view , only the devices and their func- tions that were previously selected in the navigator are displayed. All editing functions, such as Copy, Paste and Edit, can be used when editing tables. The only limitations are the nam- ing conventions of the Windows system being used. When the page and device structures are deined, a project has all the properties it needs, such as the device structure the structure identiier, e.

Page structure of a project Fig. Data added later, such as forms, is also stored in the project. This ensures that this project can later be edited with exactly the same data used when the project was created, or which was generated at the beginning of project editing, or was later stored in the project. A macro project is used for creating and automatically generating window macros, and for managing macros. Logical functions such as cross-references or connection information are not supported in a macro project nor are they displayed.

Master data e. And of course the system master data can also be manually synchronized with the project master data. It is also possible to synchronize in the other direction, to synchronize the project master data with the system master data.

If EPLAN inds inconsistencies in the master data at this point, then a message is generated and EPLAN cancels the synchro- nization because incompatible master data cannot be used to overwrite existing master data. Explorer by double clicking the Projectname. Another possibility is to drag Projectname.

EPLAN then opens the project. EPLAN manages dife- rent project types as schematic projects. EPLAN distinguishes between the project types described in the following section. All other types of projects e. A project template contains preconigured values. Later, when using the template for a new project, the project and page structure can be changed one time. Opening a projekt template Fig. But project templates can also contain pages.

You can, however, easily overwrite an existing project template that has in- correct or changed properties with a new project template. In the page navigator, you irst use Fig. In the Create project template dialog that is displayed, you need to deine the storage location and the name of the new project template. It is a good idea to create a project templates directory below the root directory, possibly with separate folders for each cus- tomer. Basic projects are, for example, projects preilled with appropriate customer values such as a predeined page structure, sample pages, graphical report templates, various master data, and much more.

EPLAN then executes a number of functions to create the basic project. Aterward, the Create basic project dialog opens and this is where you deine the directory and the project name of the basic project to be created.

Here too it is a good idea to create a basic projects folder below the root directory, possibly with separate customer folders. Once basic projects or project templates have been created, they cannot be later changed i. However, they can be overwritten with new or modiied data. There are two ways of doing this directly from project editing. EPLAN comes with several basic projects and project templates.

The third way to create a new project is via the optional project management. A new project based on an existing basic project or project template can be created here just as fast as via the project menu. Of course it is also possible to simply copy a project and give it a diferent name. This can be a project template or a basic project. You simply click the More button.

In this example, the basic project Handbook. You can select the relevant project type in the File type ield. EPLAN then returns to the Create project dialog and imports the selected basic project or the template project into the Template ield. Now, you only have to conirm this dialog by clicking oK and EPLAN will generate the new project in the speciied directory. The new project is created from the selected basic project. This may take a while depending on the hardware and the storage location server, local.

You do not necessarily need to edit these at the moment. This can be done later during project editing. The project proper- ties can now be adjusted or completely changed on the Properties, Structure etc. There is one limitation: The structure of the pages, located in the Structure tab, can no longer be changed grayed out.

It is ixed because the page structure was deined in the basic project. The project can now be edited. This dialog contains several tabs Project, Structure or Numbering and Properties. You must enter data into at least the Project tab the PPE tab is only visible when you have a license for this. The extrAs button allows you to view a summary of the project in the browser. How- ever, this only functions ater the irst Project tab has been successfully completed. The bAcK button returns you to the previous tab.

Here too, this only functions when all necessary information has been entered in the Project tab and EPLAN has created the project, or if you can move to the next tab by pressing next. Once all necessary entries have been made on the current tab, the next button becomes enabled and you can switch to the next tab.

The FinisH button has a special function. It allows the project creation to be inished without making any further manual entries. The cAncel button is used to stop and exit the New project wizard at any time. Back to the tabs: The Project tab is the main core of the project wizard. The information required on this tab is mandatory for creating a new project. These tabs can be edited or changed later Exceptions: the Structure tab and the Pages selection ield cannot be changed at a later point in time.

NOTE: The project name is not checked to see if it already exists until a template project template or basic project has been selected and the NEXT button has been clicked. The action can then still be cancelled. This can, of course, be changed to any other name.

The usual range of templates and basic projects are available for selection. Any storage location can be selected using the button. EPLAN requires no information other than these three entries. When you click the FinisH button, the wizard can immediately create the new project.

In this case clicking the FinisH button , EPLAN would just use the settings on the other tabs for the new pro- ject, generate the project, and close the project wizard. You can, but do not have to, ill in the information under Specify creation date and Specify creator. NOTE: These ields cannot be changed later on. It is therefore very impor- tant to make sure you enter the correct data. When you click next, EPLAN gener- ates the basic elements of the new pro- ject based on the selected template.

The Import project dialog is displayed. The Fig. Information on crea- Depending on the amount of data, the tion date and creator import may take a while. You can still select, for instance, a difer- ent template project or storage location by clicking the bAcK button.

On the Structure tab, you deine the subsequent page structure and the structure of the individual device groups for the project. NOTE: Once you have saved the structure set for the pages, it cannot be changed. This applies only to the structure settings of pages.

All other structure settings, such as general devices, can be changed later. Example: The Higher-level function and mounting location scheme was set for interruption points. The Superior option was also set. If an interruption point in the schematic is designated with —L12, EPLAN assigns the device tag the higher-level function and mounting location in the schematic if present based on the deined Higher-level function and mounting location scheme.

The possible changes, structures however, depend on the page scheme set. Certain preconditions exist here for the nesting of devices. NOTE: Apart from the page structure, which is the most important prop- erty, all other settings can be changed at a later date. It is a good idea to select at least the Higher-level function and mounting location scheme.

When such a scheme is set, EPLAN does not necessarily expect a higher-level function or mounting location this is also true for other structure identiiers. Therefore, you can also use this scheme to create schematics with consecutively numbered pages. If you later discover that one of the two identiiers is to be used ater all, the pages can still easily be changed to the desired higher-level function or mounting location structure. The Synchronize master data dialog opens.

The standard plot frame can be selected from the system master data pool and is then stored by EPLAN in the project automatically. The path numbering can be globally set as page-based here default value Page-oriented: every page then begins, for example, with path 1 and ends with path 10 , or the path numbering is to function across all pages.

Across pages default value Project-oriented means that the paths are numbered across all pages. For example, path 1 starts on page 1 and path 30 ends on page 3. NOTE: All these settings can be modiied as desired later on in the project settings. On this tab, you can also use in the drop-down ield to specify a predeined DT number- Deining numbering ing scheme for how new devices are to be numbered online when they are inserted.

Here too you can select existing schemes from the selection list. You can also use the button to select a scheme from the selection list. They can be applied or changed at this point.

You use the new button to create new schemes and later assign them to the project. You should use a uniied directory structure to make exported schemes easier to ind. All ields on the Numbering tab have now been entered. Clicking the next button takes you to the Properties tab, which contains general, non-essential descriptive information about the project. For example, to ill the plot frame with information, such as customer name or the name of the person responsible for the project, from the project properties, this information must be entered in the project properties.

This is not essential at this point because this is only descriptive information about the project that can be entered at a later date. When you click the FinisH button, the project is generated and can be opened in the page navigator the page overview.

The graphical editor contains all the functions you need to edit a project. To provide a certain level of clarity and make it easy to edit the page properties, EPLAN has a page navigator. The small symbols preceding the names graphically diferentiate identiiers and pages.

The sorting of the identiiers is deined in structure identiier management, i. EPLAN distinguishes between logical and gra- phical pages. EPLAN examines these page types for logical information and evaluates them accordingly cross-references, etc. The Graphical page type or the model view, on the other hand, are purely graphical non-logi- cal pages that initially do not contain logical information. EPLAN also makes a distinction between pages that can be edited interactive pages and pages that are generated automatic pages.

The Panel layout page type is an example of an interactive page and the Terminal diagram page type is an example of a generated automatic page. The exception is that there is no page type in the layout space. The layout space is the basis of the 3D representation of enclosures or other components used for the panel lay- out; here it only provides a view of the 3D data and its further processing.

You access the popup menu functions via the right mouse button or the button in the page navigator. Page menu and page navigator Fig. The procedure is the same when using the popup menu, except that in this case you select the new menu entry. The new pAge dialog then opens. New page dialog There are now two ways to integrate the new page into an existing page structure. You can deine the full page name in the Full page name ield. You can either manually change the existing entry or enter a completely new value with a preix for the structure identi- ier.

Alternatively, you can use the button to call up the Full pAge nAMe dialog. EPLAN opens the Full pAge nAMe dialog, whereby every identiier has its own input ield and own selection button, which can be used to branch to the selection dialog for the selected identiier.

Clicking oK applies the selected identiiers. EPLAN saves new identiiers in the order deined in the settings. There are no other query dialogs. If all settings and entries have been entered in the new pAge dialog and any missing structure identiiers have been created, the dialog can be closed.

EPLAN will create the new page and then show it in the page navi- gator in the chosen structure. This is nothing new.

The open in new window menu item in the page navigator popup menu is more interesting and use- ful. This menu item allows you to open several pages or even open Fig. Opening in new The procedure is simple. In the window page navigator, you select the page or pages it is possible to open several pages at once , right click to open the popup menu and select open in new window.

EPLAN then opens all selected pages. Open in new window function Fig. With three pages, the sequence starts at page 1 followed by page 2, page 3, back to page 1, etc. To close open pages, simply select the pages in the page navigator and in the pAge menu, select close. Window menu 4. To create a new page that uses the content of an existing page, you need to copy one or more pages. EPLAN then draws a thick gray border around the page to show it is selected.

Copying pages within a project and across projects Fig. EPLAN always suggests the highest free page name available in this structure. Once all entries are correct, you click oK to apply the page. Ater selecting the desired setting, you exit the dialog by clicking oK. EPLAN then copies the source page, generates a new target page, and sorts it into the page structure. Before actually overwriting pages EPLAN displays a prompt, which must be conirmed by clicking yes copy action continues or no copy action is canceled and EPLAN opens the page navigator once more.

Again the following applies when copying pages: Without asking for conirmation, EPLAN automatically sorts new identiiers into the existing structure alphabetically or at the end, depending on the setting.

They can be resorted later in structure identiier management. You can, of course, copy more than one page. Ater you make all desired entries and conirm any subsequent dia- logs, these pages are inserted into the EPLAN project in the selected structure.

These two commands always relate to the selected pages. All page-related commands, i. Since you can open and edit several projects at once in the EPLAN page navigator, it is very useful to have a function that lets you conveniently copy pages from one project to another.

As already mentioned, a project does not need to be open in the page navigator in order to copy pages from it. The lower area of the copy pAges dialog shows additional information about the selected page. A preview for the selected pages can also be activated.

The right ield in the copy pAges dialog is ixed and always indicates the current project. It cannot be changed. You can use the button to select and open any other project. Initially, only projects currently open in the page navigator are listed. In this dialog, you can select and open one or more projects to be used in the project selection dialog.

First you select the project s , then click open to add the selected project s to the pro- ject selection dialog. When you need to copy many subpages and convert them to main pages, for example. Any follow-up dialogs, such as the insertion Mode dialog, must be conirmed as required. This completes the copying of pages from external projects.

You can now copy pages from other projects. If this is not required, you can exit the copy pAges dialog with the close button. EPLAN closes the dialog and all temporarily opened projects and returns to graphical editing of the currently opened project. This page name can include alphanumeric characters. The page name number is renamed using the renAMe pAge menu item.

In the page navigator, you can also simply select the page and press the F2 key. EPLAN then lets you change the page name number without directly opening the page properties of this page. Pressing enter saves the changed page name number.